Restore your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may need to reinitialize your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the settings or are experiencing unexpected behavior. Fortunately, resetting your Holosun is a straightforward process that can be achieved in just a few actions.

• Begin by ensuring your red dot sight is activated.
• Identify the small button for reset on the bottom of the device.
• Utilize a small object to press and hold the reset button for approximately 7 milliseconds.
• Release the reset button and your Holosun EPS Carry Red Dot sight will restart.
• Your red dot sight should now be returned to its factory settings.

Reset Your Holosun EPS Carry Red Dot back to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to return to original, resetting it back to standard configuration is a breeze. First, determine the tiny button on the rear of your optic. Then, keep pressed it for around five seconds until you see the indicator light change. Your Holosun EPS Carry is now returned to its factory settings, ready for precise aiming.

revive your Holosun EPS Carry Back to Life

Is your beloved Holosun EPS Carry experiencing some glitches? Don't despair! A simple factory reset can often fix the problem and get your red dot sight back to its former glory. Before you begin, remember to disconnect the battery from your Holosun EPS Carry to prevent unintended activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these easy steps:

• Press and hold the power button for approximately 7 seconds.
• A message will flash, indicating that the reset is being performed.
• Let go of the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can insert the battery and test your sight's functionality. If you encounter any further troubles, don't hesitate to reach out to their technical assistance.

Return Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Accomplish these steps carefully to ensure a successful factory reset.

• First, Turn on your Holosun EPS Carry by pressing the power button.
• Next, press and hold both the mode button and the up/down adjustment button simultaneously.
• While continue holding these buttons, tap the power button once.
• You will show a confirmation prompt indicating that the reset process is initiated.
• Enable the process to finish. This may take a few moments. Once done, your Holosun EPS Carry will automatically power off.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Clear All Settings on Your Holosun EPS Carry

To Factory reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Holding a specific button combination. Consult your Instruction for the exact button get more info sequence for your model. Once in the settings menu, look for an option that says "Clear Settings". Select this option and confirm the reset. Your sight will then power off and restart with all settings Reinitialized to their default values.

Restore your Holosun EPS Carry through a Factory Default Settings

If your Holosun EPS Carry is acting up, a factory reset might be the solution. This will return your sight to its initial settings, clearing any custom configurations you've made. To execute this reset, follow these straightforward steps:

• Initially, locate the reset lever on your EPS Carry.
• Secondly, press a thin object, like a toothpick, to depress the reset switch.
• As you hold the reset lever engaged, turn your EPS Carry.
• The sight will flash a message confirming that the reset is successful.

Once the reset is successful, your EPS Carry will be back to its factory settings.

Report this wiki page